PS-022

GIGI-2

Offering a variety of panel arrangements and a wide-open design. A large size shelter with a two-pole design that resembles the basic design of GIGI-1.

Instruction manual

VER. 2.02 [ RELEASE : 2022 – ]

GALLERY

FUNCTION

Breakthrough Design

The biggest disadvantage of a one-pole design is the limited width, but that is solved with our extension pole. We have secured a wide living space where two people can sit comfortably face-to-face.

Simple Construction

It’s easy to set up and stands on its own by pegging down the 4 corners where the building tape is attached and inserting the two main poles. The bottom is deformed octagonal, but still easy for anyone to set up.

Plenty Space

By setting up the inner tents (option) on the outside of the main poles there is still plenty of space for furniture and camp tools between the poles, and space for 4 people to sleep comfortably.

A Huge Door Panel

Flip open the front and rear door panels and you get the open feeling of a tarp. The wide-open design is a great way to beat the summer heat.

Inner Tent (option)

Hunging Inner tent for GIGI-1 and GIG-2. By hunging upside Dring eith main pole. Setting up front, side and diagonal depend on your layout.

Ventilation system

Without upper and lower vents air circulation will simply not happen. GIGI 2 is equipped with two upper and lower vents so that the intake position can be changed depending on your setting.

Special Loop

The ceiling two special attachment points for hanging lanterns/lights. Since the rope goes from end to end of the ridgeline you can hang a lantern/light at whatever position you like.

Polyurethane Coating for Light-shielding

The back of the tent fly is coated in light-shielding polyurethane (usually transparent). By applying this coating, the gap between the seams are filled which reduces the transmission of sunlight so you can relax and stay cool, even in the heat of the summer.

Light Weight and Small

Silicone polyester is light and compact which makes it easy to carry and load in a car.

FABRIC

This tent is made of durable Ripstop Polyester fabric. By adding a layer of silicone on the front surface and polyurethane (PU) on the back surface, a high level of tear-resistance and waterproof performance has been achieved. Compared to the commonly used fluorine treatment of materials used in ordinary tents, shelters, and tarps the silicone treatment has the added benefits of significantly increasing tear-resistance and fabric penetration ricks. It is possible to have both a thing and lightweight fabric that is also strong and durable. Water-resistant to 1,500 mm for both 50D and 75D.

Fluorine coating only affects the surface of a fabric, so it adds nothing to the strength of the fabric, but our silicone treatment penetrates the fabric and has the added benefit of significantly increasing its tear resistance.

Water-resistant tester

Tear strength tester

	ZANE ARTS		General Material
FABRIC	50D Polyester Ripstop	75D Polyester Ripstop	75D Polyester Taffeta	150D Polyester Ox	210D Polyester Ox
TREATMENT	Silicone / PU	Silicone / PU	Fluorine / PU	Fluorine / PU	Fluorine / PU
TEAR STRENGTH (vertical/side)	1.95 / 1.15 kgf	3.15 / 1.21 kgf	0.72 / 0.53 kgf	1.45 / 1.10 kgf	1.65 / 1.28 kgf
WEIGHT	66g /㎡	78g /㎡	72g /㎡	112g /㎡	126g /㎡

SPEC

Tent Body

75D Ripstop Silicon Polyester・Light-shielding PU Treated ( Water Resistant 1,500mm )

Main Pole

A6061 / φ30mm / 220cm

Extension Pole

A6061 / φ14.5mm / 100cm

4m Rope

Polypropylene / φ4mm

3m Rope

Polypropylene / φ4mm

Carry Bag

150D Oxford Polyester / 72 × 20 × 25 (h) cm

Pole Case

150D Oxford Polyester

Rope Case