DT-002

OKITOMA-2

A compact, yet roomy, two-room tent for 1-2 people.

Instruction manual

VER. 2.03 [ RELEASE : 2022 – ]

GALLERY

FUNCTION

Unique Inner Tent and Vestibule

The OKITOMA-2 offers a one-of-a-kind inner tent layout that runs lengthwise, creating a spacious vestibule, efficient for camping solo or with a friend.

Large, Fully Openable Side Panels

The doors and side panels fully open to create a wide open space integrated with nature, where you can enjoy your beautiful surroundings. The vestibule has plenty of space for setting up kitchen gear and furniture for two.

Flip-up Panel

By using the optional Upright Pole 150, the side panel can be propped up to make a roof over the entrance. We recommend adjusting the Upright Pole to120 cm by removing one section from the pole.

Completely Freestanding

The OKITOMA-2 offers a completely self-supporting frame that does not require pegs to set up, it is ideal for situations where driving pegs is difficult and set up is only possible with rock weights.

Hanging Inner Tent Design

The inner tent hangs independently from the ceiling, making it easy to set up and take down without getting wet, even in the rain. The bottom corners attach to the main tent so additional pegs are not needed.

Use as a Shelter

The external frame design makes it easy to use as a shelter by removing the inner tent. Even when fully closed there is plenty of space for kitchen gear, cots, and furniture for two.

Multipurpose Floor Panel

The front and rear of the OKITOMA-2 is designed to be symmetrical. This design allows for the included footprint to also be installed in the front and used as a sitting room.

A Roomy Inner Tent

The inner tent is large enough for two people’s luggage and sleeping space. A mesh door and side panels help keep it cool even during hot weather.

Compact and Light Weight

The OKITOMA-2 is a perfect all-in-one auto camping tent that is lightweight and compact.

FABRIC

This tent is made of durable Ripstop Polyester fabric. By adding a layer of silicone on the front surface and polyurethane (PU) on the back surface, a high level of tear-resistance and waterproof performance has been achieved. Compared to the commonly used fluorine treatment of materials used in ordinary tents, shelters, and tarps the silicone treatment has the added benefits of significantly increasing tear-resistance and fabric penetration ricks. It is possible to have both a thing and lightweight fabric that is also strong and durable. Water-resistant to 1,500 mm for both 50D and 75D.

Fluorine coating only affects the surface of a fabric, so it adds nothing to the strength of the fabric, but our silicone treatment penetrates the fabric and has the added benefit of significantly increasing its tear resistance.

Water-resistant tester

Tear strength tester

	ZANE ARTS		General Material
FABRIC	50D Polyester Ripstop	75D Polyester Ripstop	75D Polyesters Taffeta	150D Polyesters Ox	210D Polyesters Ox
TREATMENT	Silicone / PU	Silicone / PU	Fluorine / PU	Fluorine / PU	Fluorine / PU
TEAR STRENGTH (vertical/side)	1.95 / 1.15 kgf	3.15 / 1.21 kgf	0.72 / 0.53 kgf	1.45 / 1.10 kgf	1.65 / 1.28 kgf
WEIGHT	66g /㎡	78g /㎡	72g /㎡	112g /㎡	126g /㎡

SPEC

Tent Body

50D Ripstop Silicon Polyester・PU Treated ( Water Resistant 1,500mm )

Inner Tent

Side : 20D Ripstop Polyester
Bottom : 70D Nylon Taffeta・PU Treated ( Water Resistant 1,500mm )

Foot Print

75D Polyester Taffeta・PU Treated ( Water Resistant 1,500mm )

Long Frame

A7001 / φ13mm

Bridge Frame

A7001 / φ11mm

Short Frame

A7001 / φ9.5mm

2.5m Rope

Polypropylene/ φ3mm

1.5m Rope

Polypropylene/ φ3mm

Repair Pipe

A7001

Carry Bag

150D Oxford Polyester / 65 × 25 × 25 (h) cm

Pole Case

150D Oxford Polyester

Rope Case