Breakthrough Design
The biggest disadvantage of a one-pole design is the limited width, but that is solved with our extension pole. We have secured a wide living space where two people can sit comfortably face-to-face.
Simple Construction
It’s easy to set up and stands on its own by pegging down the 4 corners where the building tape is attached and inserting the two main poles. The bottom is deformed octagonal, but still easy for anyone to set up.
Plenty Space
By setting up the inner tents (option) on the outside of the main poles there is still plenty of space for furniture and camp tools between the poles, and space for 4 people to sleep comfortably.
A Huge Door Panel
Flip open the front and rear door panels and you get the open feeling of a tarp. The wide-open design is a great way to beat the summer heat.
Inner Tent (option)
Hunging Inner tent for GIGI-1 and GIG-2. By hunging upside Dring eith main pole. Setting up front, side and diagonal depend on your layout.
Ventilation system
Without upper and lower vents air circulation will simply not happen. GIGI 2 is equipped with two upper and lower vents so that the intake position can be changed depending on your setting.
Special Loop
The ceiling two special attachment points for hanging lanterns/lights. Since the rope goes from end to end of the ridgeline you can hang a lantern/light at whatever position you like.
Polyurethane Coating for Light-shielding
The back of the tent fly is coated in light-shielding polyurethane (usually transparent). By applying this coating, the gap between the seams are filled which reduces the transmission of sunlight so you can relax and stay cool, even in the heat of the summer.
Light Weight and Small
Silicone polyester is light and compact which makes it easy to carry and load in a car.
This tent is made of durable Ripstop Polyester fabric. By adding a layer of silicone on the front surface and polyurethane (PU) on the back surface, a high level of tear-resistance and waterproof performance has been achieved. Compared to the commonly used fluorine treatment of materials used in ordinary tents, shelters, and tarps the silicone treatment has the added benefits of significantly increasing tear-resistance and fabric penetration ricks. It is possible to have both a thing and lightweight fabric that is also strong and durable. Water-resistant to 1,500 mm for both 50D and 75D.
- fluorine treatment
- silicone treatment
Fluorine coating only affects the surface of a fabric, so it adds nothing to the strength of the fabric, but our silicone treatment penetrates the fabric and has the added benefit of significantly increasing its tear resistance.
| TREATMENTface/ back | FABRIC | PRODUCT | TEAR STRENGTH(vertical/side) | WEIGHT | |
|---|---|---|---|---|---|
| ZANEARTS's Material |
Silicon ／PU |
50D polyester rip-stop | GIGI1・ROGA4 | 1.95／1.15 kgf | 66g /㎡ |
| 75D polyesters taffeta | ZEKU-M・GEU・GIGI2 | 3.15／1.21 kgf | 78g /㎡ | ||
| GeneralMaterial | Fluorine ／PU |
75D polyesters taffeta | – | 0.72／0.53 kgf | 72g /㎡ |
| 150D polyesters ox | – | 1.45／1.10 kgf | 112g /㎡ | ||
| 210D polyesters ox | – | 1.65／1.28 kgf | 126g /㎡ |
| Tent body x 1 | 75 D silicon PU polyester rip-stop (1,500 mm) | Main pole x 2 | A6061・φ30 mm・220 cm long | Extension pole x 2 | A6061・φ14.5 mm・100 cm long | Y peg x 6 | Duralmin 25 cm | V peg x 16 | Duralmin 17 cm | 4 m Rope x 2 | Reflective Dyneema φ2 mm | 3 m Rope x 8 | Reflective Dyneema φ2 mm | Carry bag x 3 body/pole/peg | 150 D Polyester ox |
|---|
To continue pursuing higher quality and functionality, please note that specifications and prices are subject to change without notice.
