PRODUCTS
Function

Breakthrough Design
The biggest disadvantage of a one-pole design is the limited width, but that is solved with our extension frame. In a mid-sized package, we have secured plenty of living space where 4-6 people can sit comfortably.

Simple Construction
It’s easy to set up and stands on its own by pegging down the 4 corners where the building tape is attached and inserting the center pole. The bottom is octagonal, but still easy for anyone to set up.

Plenty Space
Room to comfortably accommodate 4 people with tables and chairs and other tools too. It can accommodate up to 6 people if needed, depending on the size and layout.

Attached Floor Panel
The attached floor panel is great even when the ground is wet. With the hexagon-shaped tent body, the pentagon-shaped floor panel creates a small place to keep shoes and other wet gear outside the living space.

Panoramic Windows
One of the six panels can be completely opened and when ventilation is needed during the hot season all the window panels and door panels can be opened.

Ventilation system
Without upper and lower vents air circulation will simply not happen. ZEKU-M is equipped with three lower vents to allow plenty of air into the tent.

Polyurethane Coating for Light-shielding
The back of the tent fly is coated in light-shielding polyurethane (usually transparent). By applying this coating, the gap between the seams are filled which reduces the transmission of sunlight so you can relax and stay cool, even in the heat of the summer.

Light Weight and Small
Silicone polyester is light and compact which makes it easy to carry and load in a car.
FABRIC
This tent is made of durable Ripstop Polyester fabric. By adding a layer of silicone on the front surface and polyurethane (PU) on the back surface, a high level of tear-resistance and waterproof performance has been achieved. Compared to the commonly used fluorine treatment of materials used in ordinary tents, shelters, and tarps the silicone treatment has the added benefits of significantly increasing tear-resistance and fabric penetration ricks. It is possible to have both a thing and lightweight fabric that is also strong and durable. Water-resistant to 1,500 mm for both 50D and 75D.
Fluorine coating only affects the surface of a fabric, so it adds nothing to the strength of the fabric, but our silicone treatment penetrates the fabric and has the added benefit of significantly increasing its tear resistance.


Water-resistant tester

Tear strength tester
ZANE ARTS | General Material | ||||
---|---|---|---|---|---|
FABRIC | 50D Polyester Ripstop |
75D Polyester Ripstop |
75D Polyester Taffeta |
150D Polyester Ox |
210D Polyester Ox |
TREATMENT | Silicone / PU | Silicone / PU | Fluorine / PU | Fluorine / PU | Fluorine / PU |
TEAR STRENGTH (vertical/side) |
1.95 / 1.15 kgf | 1.95 / 1.15 kgf | 0.72 / 0.53 kgf | 1.45 / 1.10 kgf | 1.65 / 1.28 kgf |
WEIGHT | 66g /㎡ | 78g /㎡ | 72g /㎡ | 112g /㎡ | 126g /㎡ |
SPEC
Tent Body
75D Ripstop Silicon Polyester・Light-shielding PU Treated ( Water Resistant 1,500mm )
1
Floor Panel
150D Oxford Polyester・PU Treated ( Water Resistant 1,500mm )
1
Center Pole
A6061 / φ30mm / 250cm
1
Extension Frame
A6061 / φ16mm
3
3m Rope
Polypropylene / φ4mm
21
1.5m Rope
Polypropylene / φ4mm
3
Carry Bag
150D Oxford Polyester / 79 × 27 × 27 (h) cm
1
Pole Case
150D Oxford Polyester
1
Rope Case
150D Oxford Polyester
1
In order to pursue higher quality and better functionality, please note that specifications and prices are subject to change without notice.
